Safety instructions - important notes

Safety precautions during installation

During installation of the turntable, make sure that no persons, in particular children, are in the immediate vicinity of the turntable and that they do cannot touch any moving parts – danger of crushing!

Always unplug the power supply during installation work.

Lowering the antenna while driving

While driving, the antenna must always be lowered to the horizontal position (park position).

To remind yourself of this, please use the stickers in the visual area around your vehicle ignition switch.

Cleaning the antenna

To clean the antenna, use only water and cleansing agents typically used for vehicles.

Do not clean the equipment with steam jet or high-pressure washers.

Do not use any cleansing agents which contain solvents such as acetone, nitro-cellulose combination thinner, naphtha, etc. since this can damage individual components.

Instructions for installation and operation of the HDP 171 with the UFD 170

1.The turntable can only be used in conjunction with a Kathrein UFD 170 Caravan Digital Combi Receiver or a Kathrein UFD 540 Caravan Digital Receiver with HDS 160 control unit.

2.To ensure reliable functioning of the turntable, the power supply cable must be connected directly to the battery. If the power supply is too low, the receiver indicates this with the on-screen message “On-board voltage too low!” or with “HDP overload” on the television screen.

A fuse (15 A) is integrated into the power supply cable.

10

Page 10
Image 10
Kathrein MobiSet 2 CAP 210, MobiSet 3 CAP 310 manual Lowering the antenna while driving, Cleaning the antenna