Kathrein CAP 210, MobiSet 3 CAP 310 manual Dismantling for servicing, Address of the service centre

Dismantling for servicing

If repairs to the system or individual components are necessary, contact your specialist dealer or our service centre (see below for address).

Never open the turntable yourself!

Dismantling

•The cables may not be cut!

•Disconnect the power, coaxial and data cables from the UFD 170

•Remove the sealing gasket from the roof duct (Fig. E)

•The cables laid inside the vehicle can remain there

•Unscrew the six M6 screws securing the turntable on the mounting plate

•Place the turntable on the prepared support beams with the three 3.5 m long cable harnesses

•Carefully pull the three connecting cables out of the roof duct

•To ship the turntable, use the original packaging which you have saved

•Seal the opening in the vehicle roof appropriately to protect against penetrating moisture

Note:	Before replacing the UFD 170 receiver, the turntable should first
	be moved to park position.

Address of the service centre

ESC

Electronic Service Chiemgau GmbH Bahnhofstrasse 108

83224 Grassau, Germany

Phone:	+49	8641 9545-0
Fax:	+49	8641 9545-35 and -36

Internet: http://www.esc-kathrein.de

E-mail: service@esc-kathrein.de

31