SECURITY

Press the button to open the main menu. Select the “Security” menu using the buttons and press

the button. Enter the receiver PIN (factory setting “0000”) and confirm it by pressing the button. The following display appears (see example below):

Use the buttons to select the lines to be changed and use the buttons to perform the settings.

After you have made all the changes to the settings you can quit the menu again by pressing the button (your setting will be loaded).

Receiver Lock:

If the receiver lock is set to “On”, when the receiver is switched on it will request input of the PIN.

Menu Lock:

If the menu lock is set to “On”, when the main menu is called up it will request input of the PIN.

Change PIN:

Press the button – you will be requested to input the old PIN. Confirm the input by pressing the button. You must now input the new PIN and confirm it by pressing the  button. For security you must input the

new PIN a second time. Press the button to acknowledge the displayed message. The receiver PIN has now been changed.

42

Page 42
Image 42
Kathrein UFC 762si, UFC 762sw manual Security