SEARCH FOR CHANNELS
MANUAL SEARCH
So as to perform a targeted search for specific channels, the data must appear
in the four lines frequency to modulation.
Use the buttons to select the transmission channel (with transmission frequencies) that is to be searched. Press the buttons to access the next line. If the displayed transmission frequency does not
match your data, you can use the numeric pad to enter it here manually. Press the buttons to access the next line. If the displayed symbol rate does not match your data, you can also use the numeric pad to
enter it here manually. Press the buttons to access the next line. If the displayed modulation does not match your data, you can use the buttons to enter it here manually.
Press the buttons to access the next line. If the displayed modulation does not match your data, you can use the buttons to enter it here manually.
Press the buttons to access the “Network search” line. Use the buttons to select whether the network search should be “On” or “Off”. If the network search is “On”, the networking between individual cable transponders is used to find new cable transponders that have not yet been saved. These too are then searched for new channels.
Press the buttons to access the next line. Use the buttons to perform the settings for the channels to search for. You can select from “All”, “Only encrypted” and “Only free to air”.
Press the buttons to access the next line. Pressing the button starts the “Search for Channels”.
The rest of the procedure (and displays) is identical to the automatic search.
34
