Initial settings
25
Initial settings The “Installation“ menu entry in the main menu is used for initial sett ing of the
satellite receiver and for matching it to the satellite s ystem.
The receiver has already been factory preprogramm ed for standard satellite
receiving systems with a universal LNB. Thus changes are required only if the
receiving system deviates from this type of system .
Changes in the basic setting of the receiver are generally carrie d out by the
installer when the satellite receiving system is insta lled. We recommend that the
installer notes down the altered basic setting on page 45 in this operating manual.
In addition to this, you can:
- alter the order of the bo uquets
- alter the order of T V and radio programmes
- execute an automatic search run on a new digital broadcasting station
- install a new digital transponder
- activate or deactivate parenta l lock
- alter antenna settings, T V type and time
- load new system sof tware
- programme the tim er
- carry out an application check
- stipulate the language for the screen displays
- stipulate comm on interface settings
Calling up the “Installation” menu
The following steps need to be carried out to call up the m enu:
• Press the key on the remote control.
• Select the “Installation“ m enu entry in the main menu using the key and
confirm the selection with .
The “Installation“ menu is displayed on the screen