Initial settings
DiSEqC MENU
The settings for the DiSEqC signal are displayed on the screen:
| The settings have the following meaning: | |
22 KHz | Settings: |
|
| High/Low | Switchover from low band to high band on LNB. |
| Pos A/B | Switchover between two satellite positions. |
| OFF | No |
| The default setting is “High/Low“. | |
Tone burst | Settings: |
|
| OFF | The tone burst signal is switched off. |
| Pos A/B | Switchover between two satellite positions. |
| Opt. A/B | Optional selection |
| High/Low | Switchover from low band to high band on LNB. |
| The default setting is “OFF“. | |
DiSEqC | Settings: |
|
| ON | The DiSEqC signal is switched on. |
| OFF | The DiSEqC signal is switched off. |
| The default setting is “ON“. | |
DiSEqC repeat | Settings: |
|
|
| |
| OFF | The DiSEqC repeat is switched off. |
| 1 | The DiSEqC signal is repeated once. |
| 2 | The DiSEqC signal is repeated twice. |
| The default setting is “OFF“. | |
UFO mini | Settings: |
|
| OFF | No |
| ON | A |
| The default setting is “OFF“. | |
Remote frequency | Intermediate frequency of | |
| Settings in the DiSEqC menu should be carried out only by trained specialists. | |
| Incorrect settings can result in loss of the satellite signals (reception no longer | |
| possible). |
|
34