Connecting up and putting into operation
8
Connecting up and putting into operation
The following section is intended specifically for th e specialist dealer. If you are not
carrying out the installation yourself, there is no ne ed to pay any attention to this
section. Sample configurations are to be found in the “C onnection examples“
section.
Do not connect the unit to the mains until after all instal lation work has been carried
out properly.
Follow the guidance given in section “Safety- and Ins tallation Instructions“.
Connecting up the unit
Satellite signal connection
• Connect the Sat IF input (5) of the recei ver to the satellite receiving system.
For the connection use a coaxial cable with an F-type conn ecting plug.
If the F connector is not yet fitted to the cable:
• Insulate the cable as indicat ed in the following illustration, and
• Carefully screw the F connector onto the cable until it is firmly seated on it.
When fitting the plug, make certain that none of the fine wires of the braided shield
makes contact with the inner conductor giving rise to a short-c ircuit.

Receiving system presets

Presetting carried out for the control signals was fo r conventional receiving
systems, thus 14/18 V for polarity switching and 22 kH z switching signal for
satellite selection in the case of multifeed receiv ing systems.
If DiSEqC or tone-burst switching matrices are to be used in the receiving system,
the default setting must be changed in the initial setup m enu, menu entry
“DiSEqC“..
For this, refer to section “Initial settings, DiSEqC menu“ .
It is essential to comply with instructions for use of the multiswitch employed.

TV and video recorder connection

• Connect-up the satellite recei ver (TV Scart socket) and TV set with a Scart
cable.
If your TV set has stereo capability, a Scart connection allo ws you to receive the
sound in stereo.
• Connect-up the video recorder and satellite receiver (VCR Sc art socket) again
using a Scart cable.

Audio connection

If you want to hear the sound via the hi-fi system, connec t the audio Cinch sockets
(view of rear panel, 2) and the hi-fi system with a Cinch cab le.