Door £einstallation

Materials Needed:

Phillips screwdriver

5/d'hex head driver

1.Install hinge assemblies:

Install center hinge with Phillips screws.

2_ Place hinge side of refrigerator door on center hinge pin.

Install top hinge with 5/,?,hex head sorews.

3_ While holding refrigerator

door

f

upright, tighten down top

hinge

 

with %" hex head driver.

 

 

4.Reconnect two-pin connector.

5.Replace top hinge covers.

Metal Door Handle

Materials Needed:

3/_2"Allen wrench

Connecting the Water Supply to ice Maker

To reduce the risk of injury or death, follow basic precautions, including the following:

Read all instructions before installing ice maker.

Do not attempt installation if instructions are not understood or if they are beyond personal skill level.

Observe all local codes and ordinances.

Do not service ice maker unless specifically recommended in Use & Care Guide or published user-repair instructions.

Disconnect power to refrigerator before installing ice maker.

Water damage due to an improper water connection may cause mold/mildew growth. Clean up spills or leakage immediately!

Gloves to protect hands

 

To avoid property damage or possible injury,

]

follow basic precautions, including the

 

 

i Note:

Metal handles can scratch doors.

following:

 

To Remove:

 

Consult a plumber

to connect W' O.D. copper

Loosen set screws in handle using 3_2"Allen

tubing to household plumbing to assure

compliance with local codes and ordinances.

wrench.

 

 

 

 

Repeat the procedure on all screws.

 

Confirm water pressure to water valve is between

 

35 and 100 pounds per square inch, 20 pounds

To Replace:

 

 

per square inch without filter.

 

 

 

Align handle with the mounting posts.

 

Do not use a self-piercing, or _,?'saddle valve.

 

 

 

Apply

upward pressure to the handle and

hold.

Both reduce water

flow and can become clogged

Fully tighten all set screws to secure handle in

over time, and may cause leaks if repair is

 

 

place.

attempted.

• Tighten nuts by hand to prevent cross threading. Finish tightening nuts with pliers and wrenches. Do not over-tighten.

• Wait two to three hours before placing refrigerator into final position to check and correct any water leaks. Recheck for leaks after 24 hours.

Verify the copper tubing under the sleeve is smooth and free from defects. Do not reuse an old sleeve.

10

Page 10
Image 10
Kenmore 596.760637, 596.762647, 596.762637 Door £einstallation, Connecting the Water Supply to ice Maker, Metal Door Handle

596.760647, 596.762627, 596.762547, 596.760537, 596.760637 specifications

The Kenmore 596 series refrigerators, specifically models 596.762647, 596.762637, 596.762597, 596.762537, and 596.760627, are designed to deliver outstanding performance and efficiency, catering to the needs of modern households. With a polished exterior and user-friendly features, these models combine functionality and style seamlessly.

One of the standout features of the Kenmore 596 series is the advanced cooling technology. Utilizing a multi-air flow system, these refrigerators ensure even temperature distribution throughout the compartments. This reduces the chances of temperature fluctuations, thereby preserving the freshness of food and extending the shelf life of perishable items.

The interior layout is thoughtfully designed, featuring adjustable shelving, crisper drawers, and door bins that can accommodate larger bottles and containers. The humidity-controlled crisper drawers are ideal for keeping fruits and vegetables fresher for longer by maintaining optimal moisture levels. Additionally, the LED lighting illuminates the interior, providing better visibility of stored items while also being energy efficient.

Energy efficiency is a hallmark of the Kenmore 596 series. Most models are ENERGY STAR certified, emphasizing their commitment to reducing energy consumption and lowering utility bills. This is achieved through innovative insulation technologies and energy-efficient compressors, making the models environmentally friendly without compromising performance.

Another noteworthy aspect of these refrigerators is their advanced water filtration system. Equipped with a built-in water filter, the Kenmore 596 models provide clean and great-tasting water and ice, ensuring that essential hydration needs are met. The easy-to-replace filters ensure that maintenance is straightforward, allowing users to enjoy fresh water without hassle.

In addition to practical features, the Kenmore 596 series boasts a sleek design with stainless steel finishes that complement a variety of kitchen styles. The models come equipped with user-friendly digital controls for precise temperature management, alongside alerts for when the door is left ajar, providing added convenience and peace of mind.

In conclusion, the Kenmore 596 series refrigerators are a blend of efficiency, style, and advanced technology. With their focus on maintaining food freshness, energy savings, and ease of use, these models are excellent choices for any modern kitchen setting, ultimately making daily meal preparation and storage a more enjoyable experience.