....... | 0 | 5 | 10 |
....... | |||
....... | 1 | 6 | 11 |
| 2 | 7 | 12 |
| 3 | 8 | 13 |
| 4 | 9 | ... |
|
| Selection Mode |
| MANUAL | |
| System | |
| INSTALLATION | |
| Search | |
|
| Programme No. |
|
| Store |
|
|
|
Manual installation
4 Select Manual Installation with the keys V or W and press OK.
5 The MANUAL INSTALLATION menu appears.
In the left upper corner of the screen a programme number, a system, a frequency or possibly a channel number are displayed.
5Selection Mode is only present and lights up if the country you selected in the COUNTRY menu also offers the channel option.
In this case you can choose either channel or frequency mode.
4 Press the keys C or B to select frequency,
1 | Select the TV system | English |
| Television pictures are not broadcast in the same way in all countries. We | |
|
|
speak of different television systems (PAL, SECAM, NTSC,...).
4Select System with the keys V or W.
You have your own aerial | or | You are connected to a cable system |
4 Select the country or part of the world | 4 | Select the country or part of the world |
from where you want to receive the TV |
| where you are now located. |
channel with the keys B or C. |
|
|
Go on to 2. |
|
|
2 Search for a TV channel
VCR 1 | TV | TUNER | |
| |||
VCR 2 |
| TAPE | |
a SAT |
| DCC | |
AMP |
| CD | |
M |
|
| |
TV |
| B | |
MENU | B | OK | |
| |||
B |
| B | |
K | B | K | |
a | 0 | ||
| |||
L | c | L |
E 1 2 3
e 4 5 6
c 7 8 9
4 Select Search with the keys V or Wand press OK.
5 The TV searches for a channel.
5 The frequency or the channel number increases until a TV channel is found. Dependent on the choice you made in the selection mode the searching stops at a frequency or at a channel number.
5 In the bar, which may appear briefly at the bottom of the screen, the broadcaster may transmit its programme name or another message.
4 Press J of the remote control to recognise which programme is being broadcast.
5 The menu MANUAL INSTALLATION disappears temporarily.
Is the reception poor ?
You may be able to improve the reception of picture and sound of a TV channel by adjusting the frequency with the P - or + key on the remote control. The frequency is adjusted in the block shown in the upper left corner of the screen.
Go on to 3 if you want to store the channel that has been found.
Do you want a different channel ?
4Press OK again to restart the search.
J a J 0 2 | No channel found ? | |
|
| 4 Interrupt the search by pressing the keys V or W or the MENU key. |
|
| |
|
| Check that you have selected the correct TV system or that the aerial is |
|
| connected properly. See Tips p. 42. |
7
