n
|
|
| REAR |
8 | m | m |
|
| FRONT | ||
|
| ||
|
|
| |
|
| R | L |
Headphone
4Insert the plug into the headphone socket n at the front of the TV.
4Press c on the remote control to switch off the internal loudspeakers of your TV.
The headphone socket has an impedance of between 8 and 4000 Ohm and is of the 3.5 mm jack type.
In the SOUND menu select Headphone to adjust the headphone volume and balance and to select the audio source for your headphone sound.
See page 17.
English
| Extra loudspeakers |
| You can replace the left and right internal loudspeakers of your set by two |
4 | extra loudspeakers, min. 8 Ohm. |
Connect the loudspeakers to the connector clips at the back of the TV. | |
4 | Push the connector clip down and insert the ends of the wires into the |
| openings : |
| the negative wires to the black connector clips, the positive wires (the one |
| with a black line) to the red connector clips. |
4 | Do not insert the wires too far. |
Connect the front left loudspeaker to FRONT L and the front right loudspeaker | |
4 | to FRONT R. |
Put the loudspeaker switch on the back in the c position. | |
5 | The internal right and left loudspeakers of your TV are now switched off. |
37
