EPG - ELECTRONIC PROGRAMME GUIDE
REMINDER FUNCTION (CHANGE OVER TO PROGRAMME)
If you wish to be reminded at the start of a programme, you can activate the reminder function for the desired programme. The reminder function is set up in exactly the same way as programming a recording. The only difference is that in the “Target” line the entry must be “Reminder (just switch over)”. Select the desired settings for your reminder (see “Recording (timer)” for the setting options) and then confirm the setting of
the reminder function by pressing the button. The programme is marked in the Programme Guide with a green dot and the receiver will automatically switch over to the
RECORDING (TIMER)
When using the UFS 740sw on a CAP 900 turntable unit, please follow the timer programming instructions in the installation and operating manual supplied with the CAP 900.
The (red dot) button allows you to set up a programme at any time for recording on an external recorder.
The programme to be recorded can be selected in any of the EPG views, provided the (red dot) button appears at the bottom of the screen display.
Programme present in the EPG:
Select the desired programme and press the (red dot) button. The following display appears (example):
Programme not present in the EPG:
Select any programme on the channel on which the desired programme is to be transmitted at a later
time and press the (red dot) button (starting and finishing times together with the recording date must be input manually). The following display appears (example):
44
