Kathrein UFS 740sw manual Parental Control, Blocking the Main Menu, Blocking the Receiver

PARENTAL CONTROL

Select the “Parental Control” menu using the menu button , the  buttons on the main menu

and . You are now prompted to enter the PIN code (factory default setting: 0000). After entering the PIN using the keypad you are shown the following display:

Also pay attention to the bars at the bottom of the on-screen display! This provides hints on what to do next.

Select the parameters to be changed using the  buttons.

BLOCKING THE MAIN MENU

Use the  buttons (On/Off) to select whether the main menu should be blocked. If the menu is blocked, changes can be made only by entering the four-digit PIN code.

BLOCKING THE RECEIVER

Use the buttons (On/Off) to select whether the receiver should be blocked. If the receiver is blocked, it can be operated only by entering the four-digit PIN code after it is switched on (factory setting: 0000).

Press the  button to exit the menu again.

SETTING A NEW CODE (PIN)

Press to replace the old PIN with a new one. Enter the new (four-digit) PIN. For security you must repeat the new PIN code once again. Confirm the change of PIN code by pressing the  button.

Keep your password in a safe place, so that you always have access to your channels even if you might have forgotten it.

If you have forgotten your password, you must contact your dealer, who will be able to unlock your receiver for you.

65