FIRST INSTALLATION: One cable (manual)

Secure channel with PIN

If your single-cable system allows the transmission frequency to be protected by inputting a PIN, this is the menu where that can be done. No other receiver can then use that transmission frequency unless the PIN is input.

Select the setting “Yes” using the  buttons. A line with the text “Password PIN” is then displayed. Press the  buttons to select this line. You can now use the number buttons to enter a PIN (0-255).

Test connection

When you have completed all the settings, press the  buttons to switch to the “Test connection”

selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Confirm this display with the  button. Then press the

button. You will be asked whether you wish to save the changes. Use the  buttons to select “Yes, save changes” and confirm by pressing the  button. Now press the ! (green) button.

The receiver will automatically display the menu for the channel search. Continue with the section (Execute channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings (frequency and transmission channel) and if necessary call for expert help.

24

Page 24
Image 24
Kathrein UFS 740sw First Installation One cable manual