FIRST INSTALLATION

LNB settings

Here use the  buttons to select the LNB type used in your system. The choice is between “Universal” and “User-defined”.

Universal:

No further input required, since all necessary frequency ranges are covered by a universal LNB.

User-defined:

If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was configured.

Use the buttons to select the frequency range to be changed (low, high or limit frequency).

Use the  buttons or the digital input buttons to set the exact frequency for which your LNB was configured.

Test transponder

To check whether the settings that you have

made are

correct,

use

the



buttons

to move

to the

“Test

transponder”

field.

Use the  buttons to select the required transponder from the various ones listed. If your settings are correct, you will see at the top right of the screen the live signal of a channel for the currently selected transponder.

If you are not receiving a signal, check your settings again and if necessary call for expert help.

Use the  buttons to select how many satellites (max. 4) you would like to receive with your reception system. The following display appears (example):

Use the  buttons to select the first satellite

slot. Press  to access the menu for the satellite settings. The following display appears (example):

18

Page 18
Image 18
Kathrein UFS 740sw manual LNB settings, Test transponder