F
Assembly
WARNING
Children can be harmed by small parts, sharp edges and sharp points in the vehicle’s unassembled state, or by electrical items. Care should be taken in unpacking and assembly of the vehicle. Children should not handle parts, including the battery, or help in assembly of the vehicle.
1
Rear Axle 
.437
Cap Nut
.437"
•Fit a .437 cap nut onto one end of the rear axle.
•Tap the other end of the rear axle with a hammer to secure the cap nut on the end of the rear axle.
Hint: You may want to position the cap nut on a scrap block of wood to protect the assembly surface.
| 2 |
| Rear Wheel Driver |
|
| ||
|
| (Ring Side Down) |
Rib Up
Rear Wheel
Hubcap
(Indented Side
Down)
•Slide a hubcap, indented side down, onto the rear axle.
•Locate a rear wheel. The rear wheels are wider than the front wheels.
•Slide a rear wheel onto the rear axle. Make sure the ribs on the wheel face up.
•Slide a rear wheel driver, ring side down, onto the rear axle. Fit the grooves on the rear wheel driver onto the ribs on the rear wheel.
3
Rear Axle
Assembly
•Position the vehicle
•Slide the rear axle assembly through the hole in the back end of the vehicle body. Make sure the rear wheel driver fits onto the pins in the motor assembly inside the vehicle.
7
