2nd Rinse

A second rinse can be used to aid in the removal of detergent or bleach residue from garments. This option provides an additional rinse with the same water temperature as the Normal rinse.

Cycle Signal

This signal is helpful when you are removing items from the washer as soon as it stops. Select ON or OFF.

Preset cycle settings of Water Temperature, Spin Speed, and Rinse Options can be changed. You can change a modifier after starting a cycle anytime before the selected Modifier begins. Not all Modifiers are available with all options and cycles.

Auto T_rnpControl

0 Hot/Cold

Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.

Temperature

Guide

 

 

 

 

Wash Water

Temperature

Suggested

Fabrics

HOT

 

Whites

and

pastels

 

 

Heavy

soils

 

 

WARM

 

Bright

colors

 

 

 

Moderate to light

soils

COLD

 

Colors

that

bleed

or fade

 

 

Light soils

 

 

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove.

Medium I._ Warm/Cold

I igh It Warm/Warm

/

Low O Cold/Cold

© ©

Spin Wash/Rinse

Speed Temp

To change the spin speed, select the SPIN SPEED button until the desired setting illuminates.

To change the water temperature, select the WASH/RINSE TEMP button until the desired setting illuminates.

Wash/Rinse Temp

Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a uniform water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned ON when a cycle is selected. See Preset Cycle Settings table in "Cycles."

ATC ensures consistent cleaning.

ATC works for the wash temperature with Warm/Warm, Warm/Cold, and Cold/Cold settings.

ATC works for the rinse temperature with the Warm/Warm setting.

The Cold rinse temperatures depend on the cold water at your faucet.

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles.

CYCLE

 

SUGGESTED

LOAD TYPE

 

 

AVAILABLE OPTIONS

 

 

 

 

 

 

 

Delay

Start

2nd Rinse

Cycle

Signal

Whitest

Whites

Soiled

white fabrics

 

 

_'

v'

 

_'

Heavy

Duty

Heavily

soiled

underwear, towels, shirts,

etc., made

of cotton

_'

v'

 

i/

Normal/Casual

Normally soiled blouses, shirts, overalls, etc., made of

_'

v'

 

v'

 

 

polyester, nylon, cotton, linen, or cotton blends

 

 

 

 

 

Express Wash

Small loads of 2-3 lightly soiled cotton,

polyester, nylon, and

_'

v'

 

v'

 

 

cotton

blends.

 

 

 

 

 

 

 

Delicate

Curtains and

delicate clothing, dresses,

skirts, shirts

and

_'

v'

 

i/

 

 

blouses

 

 

 

 

 

 

 

 

Rinse & Spin

All loads

 

 

 

_'

v'

 

i/

Drain & Spin

All loads

 

 

 

_'

 

 

v'

17

Page 17
Image 17
Kenmore 110.4646, 110.4647 manual Hot, Load Type Available Options