Installation clearances
•The location must be large enough to allow the washer door to be fully opened.
•Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90 ° and it is not reversible.
•Additional clearances might be required for wall, door, and floor moldings.
•Additional spacing of 1" (2.5 cm) on all sides of the washer is recommended to reduce noise transfer.
•Companion appliance spacing should also be considered.
Washer Dimensions
501/4"
(127.6cm)
36"
(91.4cm)
Door is not reversible
Recommended installation spacing for custom undercounter installation
The dimensions shown are for the recommended spacing. Custom undercounter installation - Washer only
37"rain,
(93.crn)5
(2.5end) (6&6ore) (2.5cm)
Recommended installation spacing for recessed or closet installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
|
| J_ | 3" |
[] | 45" T |
| (7.6 cm) |
48 in?*_ | f | ||
(3!0 cm2) | |||
| (122cm} |
|
|
24in,2*- (155cm_)
(7.6cm)
I1" t<--25v " _'
(2.5cry) (80cm) (10.2cm)
A
A. Side view - closet or confined area
B. Closet door with vents
* Min. top and bottom air openings for closet door.
Recessed or closet installation - Washer on pedestal
!" _ | 27" | !" | 11°_" | 291/4" _,- 4" |
(5._orn) ' | (_8.6or,t | ' (z_) | (2._orn) | 55or_ _5.2or_ |
| A |
| B |
|
A.Recessedarea
B.Side view - closet or confined area
