Kenmore 110.4751 manual Laundry Guide, Temperature Guide, Auto Temp Control

Temperature Guide

Wash Water Temperature	Suggested Fabrics
HOT	Whites and pastels
	Heavy soils
WARM	Bright colors
	Moderate to light soils
COLD	Colors that bleed or fade
	Light soils

In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve well. Soils may be difficult to remove.

Auto Temp Control

ATC (Auto Temp Control) electronically senses and maintains a uniform water temperature. ATC regulates incoming hot and cold water. The ATC is automatically turned ON when a cycle is selected. See Preset Cycle Settings table in “Cycles.”

■ATC works for the wash temperature with Warm/Warm, Warm/Cold, and Cold/Cold settings.

■ATC works for the rinse temperature with the Warm/Warm setting.

■The Cold rinse temperatures depend on the cold water at your faucet.

Laundry Guide

Refer to this chart for suggested load types and their corresponding cycles. Listed to the right are the options available to each of these washer cycles.

CYCLE	SUGGESTED LOAD TYPE		AVAILABLE OPTIONS
		Delay Start	Prewash	2nd Rinse	Cycle Signal
Whitest Whites	Soiled white fabrics	✔	✔	✔	✔
Heavy Duty	Heavily soiled underwear, towels, shirts, etc., made	✔	✔	✔	✔
	of cotton
Normal/Casual	Normally soiled blouses, shirts, overalls, etc., made	✔	✔	✔	✔
	of polyester, nylon, cotton, linen, or cotton blends
Express Wash	Small loads of 2-3 lightly soiled cotton, polyester,	✔		✔	✔
	nylon, and cotton blends.
Delicate	Curtains and delicate clothing, dresses, skirts, shirts	✔		✔	✔
	and blouses
Rinse/Drain & Spin	All loads	✔		✔	✔
Clean Washer	No clothes	✔			✔

18