DIRT SENSOR
IN OPERATION
The dirt sensor
light system is mounted on the
It consists of a series of two red lights and two green lights, The lights give you an indication of the amount of dirt particles that are passing through the sensor on its way to the dust bag.
INITIAL START UP
When the
1.Two reds come on,,
2.Two greens are on and will remain on until the
NOTE: If the nozzle is on a surface that has
dirt on it, dirt will be picked up by the vacuum cleaner and the red lights might stay on.
The vacuum cleaner creates suction that picks up dirt. Rapidly moving air carries the dirt to the dust bag through the airflow pas- sages. Tile dust bag lets the air pass
through, while it traps the dirt°/_ For best cleaning results, keep the air- _' flow passage open. Check the starred z4",7 areas occasionally for clog& Unplug ./_#//
from outlet before checking° _._i'e._/
///
When the
When the green lights stay on as the Power- Mate s is moved back and forth over an area, the sensor is not seeing enough dirt to warrant further cleaning of that area,
NOTE: Dirt sensor lights DO NOT function in the FLOOR setting.
f/f/_...._ |
|
//) _ | \ |
_/" | 'It |
| Y |
Motor
Safety _haust
Fflf_r Filter
14