Kenmore 116.25812 owner manual To Replace Agitator Assembly, To Checkthe Brushes

1.Remove Power_Mate ® cover as shown in

BELT CHANGING AND AGITATOR CLEANING section_

Push in	2,	Push in and		turn
And Turn	bulb		counterclock-
	wise,		then pull	out
	to	remove,

_	Push In
	And Turn	bulb clockwise,		to
		replace.	Bulb	must
		3 Push in and turn
	_.	not be	higher	than
	_15	Watts(130		Volts),,

4.Reinstall Power-Mate e cover as shown in

BELT CHANGING AND AGITATOR CLEANING section.

NOTE: See PARTS AND FEATURES for bulb number,

WARNING

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before per- forming maintenance to the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.

TO CHECKTHE BRUSHES

_:z:::__ When brushes

support bars,

replace the

levei of the base agitator

Base Support Bars assembly,

TO REPLACE AGITATOR

ASSEMBLY

1. Remove Power-Mate s cover, belt and agitator assembly See "To Remove Belt" in

BELT CHANGING AND AGITATOR CLEANING..

2, Replace agitator assembly.

3. Reinstall belt and Power-Mate® cover. See "To replace belt" in BELT CHANGING AND AGITATOR CLEANING.

20