CANISTER CARE
For best cleaning results, the dust bag should be changed often, The electronic performance indicator will come on when the bag needs to be changed or the airflow is blocked
NOTE: See PARTS AND FEATURES for Bag Number,
1. Unplug cord from wail outlet.
7.The red bag mount will flip forward after removing bag. This will prevent the hood from closing until a new bag is installed
Note: DO NOT bend or crease the middle of the cardboard when installing the bag into the bag mount slots.
8.Rotate red bag mount down and
install bag into slots per illustration,
4.Disengage cardboard tab from
red bag mount by pulling away and lifting up
5.Pull bag out of the red bag mount.
Safety
Filte
Red Bag
Mount
2.Remove hose from canister.
3, Pull hood
release out and up, then lift canister
hood,
6. Check the
motor safety filter and
replace, if necessary
pushing down until the cardboard tab
locks into position and the holes align. Tuck the bag
securely into the bag cavity so that none of it is able to be pinched by the hood,
9.Close and latch canister hood_
10.Reinstall hose
!1. Plug cord into wall outlet.
i ,i i, ,111,1111ii | i | i |
CAUTION
NEVER REUSE A DUST BAG. Very fine materials, such as carpet freshener, face powder, fine dust, plaster, soot,
new carpet lint, etc. can clog the bag and cause it to burst before it is full and
may cause damage to vacuum cleaner motor. Change bag more often when vacuuming these materials.
1.Unplug cord from wall outlet, DO NOT drip water on vacuum cleaner.
2o Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and water, then wrung dry. Wipe dry after cleaning.
3_ To reduce static electricity and dust build- up, wipe outer surface of vacuum cleaner and attachments.
i
CAUTION
Do not use attachments if they are wet. Attachments used in dirty areas, such as under a refrigerator, should not be used on other surfaces until they are washed.They could leave marks.
15
