DIRT SENSOR
The DIRT SENSOR DIRT
light system is mount- SENsoR...._.
ed on the PowerMate nozzle near the reset button. It consists of a series of two red lights and two green lights..
The lights give you an indicationof the amount of dirt particles that are passing through the sensor on its way to the dust bag..
INITIAL START UP
When the PowerMate is first started, the fol-
lowing light sequence occurs in a
IoTwo reds come on.
2.Two greens are on and wi]l remain on until the PowerMate nozzle is placed in use_ NOTE: if the nozzle is on a surface that has dirt on it, dirt will be picked up by the vacuum cleaner and the red lights might slay on
IN OPERATION
When the PowerMate is being moved back and forth on the floor, the lightswill change
from one configuration to another as dirt is being vacuumed..As long as the red lights are on, dirt is passing through the wand to indicate that the surface still needs cleaning.
When the green lights stay on as the PowerMate is moved back and forth over an
area, the sensor is not seeing enough dirt to warrant further cleaning of that area.
NOTE: Dirt sensor lights DO NOT function in the FLOOR setting
| REMOVING |
| CLOGS | |
The vacuum cleaner creates suction that |
|
| ||
picks up dirt.. Rapidly moving air carries | the |
| ,i'f/_._.'_._ | |
dirt to the dust bag through the airflow pas- |
| //).,_ | ||
sages. The dust bag lets the air pass |
| ,/_._/' | ||
through, while it traps the dirt_ | //// |
|
| |
For best cleaning | results, keep the airflow ,,,_>_y | t | ||
passage openr Check the starred areas | ..,_'._" |
| [, | |
occasiofoFclogs,Turnoffand.ally | #/ |
| li | |
unplug vacuum cleaner from outlet ..___/ |
|
| ||
before checking | __// |
|
|
|
I
Motor
15