Kenmore 116.29914, 116.29915 manual Bulb Changing

BULB CHANGING

, WARNING

Electrical Shock Or Personal Injury Hazard

Turn off and unplug vacuum cleaner

before performing maintenance to the vacuum cleaner, Failure to do so

could result in electrical shock or personal injury from the vacuum cleaner suddenly starting.

1.Turn off and unplug vacuum cleaner from electrical outlet,

Flat

2,,Pry light lens out at slots as shown on both sides,

Rotate lens up and Iift off,,

3, Remove the light bulb by pulling straight out.,

CAUTION

Do not use a bulb rated over 9W (13V)o During extended use, heat from the bulb could overheat surrounding plastic

parts° ,

4_ To replace the light bulb, carefully insert fully into sloL

Note: See PARTS AND FEATURES for bulb number,

5.To replace light

lens, place tab at front of lens into slot.,

6, Rotate lens down

and firmly snap into place,,

21