DWBS Testing
NOTE:
DO NOT USE THE disable wt-upgrade COMMAND.
WT Firmware Download Error Codes
The following table provides a list of error codes related to WT firmware download for the 9601 WT and 9630 Series WT. A low severity error code indicates that the WT will automatically restart the firmware download process after a short delay. A high severity error code terminates the firmware download process; in such a case, the user may have to intervene to restart the firmware download process.
NOTE:
All errors starting with “89” originate from the RC. All other errors originate from either the 9601 WT or 9630 Series WT.
Table 4-2. WT Download Error Codes
Error Code | Severity | Description/Recommendation |
|
|
|
0x01 | Low | Checksum in the received message does not |
|
| match the calculated checksum of the message. |
|
| For the 9601 WT, restart the download process. |
|
| For the 9630 Series WT, the download |
|
| automatically restarts; therefore, no user |
|
| intervention is required. |
|
|
|
0x02 | Low | WT received an unknown message from the RC. |
|
| For the 9601 WT, restart the download process. |
|
| For the 9630 Series WT, the download |
|
| automatically restarts; therefore, no user |
|
| intervention is required. |
|
|
|
0x8b | Low | WT timed out waiting for the protocol message |
|
| from the RC. |
|
| This error code is not supported for the 9601 WT. |
|
| For the 9630 Series WT, the download |
|
| automatically restarts; therefore, no user |
|
| intervention is required. |
|
|
|
0x81 | Low | Illegal boot code state in the download process. |
|
| For the 9601 WT, restart the download process. |
|
| For the 9630 Series WT, the download |
|
| automatically restarts; therefore, no user |
|
| intervention is required. |
|
|
|
