UTAM Disablement

Introduction

NOTE:

The rules of the Federal Communications Commission (FCC) apply only to the United States. In the US, do not activate the DWBS until you receive the installation package and UTAM clearance for the site from the DEFINITY Wireless Design Team (DWDT).

Systems in Canada follow the same UTAM disablement rules as in the US, as specified by Industry Canada (IC) and the Industry Advisory Group (IAG).

For disablement rules in other countries, contact the International Offer Manager.

The rules of the FCC and UTAM, Inc. (designated by the FCC as a frequency coordinator for the unlicensed band) mandate that any wireless system, including the DWBS, that operates in the 1910-1930 MHz band automatically disables itself if the system is moved from the initial premises where it is installed. (This means that Wireless Fixed Bases (WFBs) and Cell Antenna Units (CAUs) may be moved within a customer building, but they may not be moved to another customer location.) In keeping with this requirement, the DWBS automatically disables the radio transmission if the DEFINITY Enterprise Communications Server®(ECS) experiences a total loss of power. The radio transmission may be enabled only after the Lucent Technologies remote maintenance center is able to contact the DEFINITY ECS to confirm the system’s location. This confirmation occurs within approximately 30 minutes after power is restored.

A power-up reset of the DEFINITY ECS generates a major power alarm, and the DWBS will not operate until the location of the DEFINITY ECS can be verified by an authorized Lucent Technologies representative. (However, a wired set would

Issue 5 June 1999 1-1

Page 16 Page 18
Page 17
Image 17
Lucent Technologies 555-232-102 manual Utam Disablement, Introduction
Page 16 Page 18

555-232-102 specifications

Lucent Technologies, a key player in the telecommunications industry during the late 20th century, played a significant role in advancing the technology that shaped modern communication systems. Among its diverse product offerings, the 555-232-102 model stands out as an exemplary piece of equipment, notable for its robustness and versatility.

The 555-232-102 is primarily a telecommunications switch designed for both small and large-scale networks, making it suitable for a variety of applications. Its main features include a highly reliable architecture that supports both voice and data transmission seamlessly. This model incorporates advanced signaling technologies, which enable it to handle multiple connections simultaneously, enhancing its efficiency in busy environments.

One of the defining characteristics of the 555-232-102 is its modular design. This allows for easy upgrades and customization depending on the user’s specific needs. With various interfaces available, including analog and digital connections, the device caters to a wide range of telecommunications technologies, from traditional landline systems to modern VoIP setups.

The technology embedded in the 555-232-102 also emphasizes security and redundancy. Built-in failover protocols ensure that even in the event of a hardware failure, communication remains uninterrupted. This aspect is crucial for critical infrastructure where downtime can have serious consequences.

Moreover, the 555-232-102 supports multiple protocols, making it future-proof as telecommunications standards evolve. This adaptability allows organizations to invest in a solution that remains relevant for years to come without the need for complete overhauls.

Another key technological feature is its user-friendly management interface. This interface allows network administrators to monitor performance metrics, troubleshoot issues, and configure settings with ease. The intuitive design reduces the learning curve and enables rapid deployment in various environments.

Energy efficiency is another characteristic of the 555-232-102 that aligns with modern standards of sustainability. By optimizing power consumption without compromising performance, Lucent Technologies demonstrates a commitment to eco-friendly practices.

In conclusion, the Lucent Technologies 555-232-102 embodies the intersection of reliability, versatility, and advanced telecommunications technology. Its modular design, support for multiple protocols, robust security features, and user-friendly management tools make it a significant asset for any organization looking to enhance its communication infrastructure. As modern telecommunications continue to evolve, the legacy of the 555-232-102 serves as a benchmark for future innovations.
Top Page Image Contents