Lucent Technologies 555-232-102 manual 4. Station Form Fields Page, Field Name, Explanation

Switch Administration

Table 2-4. Station Form Fields (Page 3)

Field Name	Explanation
Site Data
- Room	Enter up to 10 characters to identify where the WT’s
	charging base is located or where the WT user’s room is
	located.
- Info1	Enter up to five characters that will be useful for
	identification purposes.
- Info2	Enter up to five characters that will be useful for
	identification purposes.
-Floor	Enter up to 10 characters to identify the location of the
	owner of the particular WT.
-Building	Enter up to 10 characters to identify the location of the
	owner of the particular WT.
-Set Color	Enter black for the DWBS WT.
Abbreviated Dialing
- List 1	Enter p for personal, s for system, g for group, or e for
- List 2	enhanced. A maximum of three Abbreviated Dialing lists
	can be accessed by the DWBS handset. If p or g is entered,
- List 3	a personal list number or a group number, respectively, is
	also required.
Button Assignments
1. call-appr	The listings in the left column are the only administrable
2. call-appr	types for buttons 1, 2, and 3 that are supported by the WT.
	The default is call-appr for buttons 1, 2, and 3.
3. call-appr (9601+ only)
1. brdg-appr	The principal extension must be the same for all buttons.
2. brdg-appr	The Auto Select Any Idle Appearance field must be set to y.
3. brdg-appr (9601+ only)	NOTE: The Bridged Call Alerting field should be set to y if
	this option is used.
1. abrdg-appr	Any administered analog extension.
2. call-appr	NOTE: The Bridged Call Alerting field should be set to y if
3. call-appr (9601+ only)	this option is used.

24. Submit the form.

2-20Issue 5 June 1999