Cell Antenna Unit

5.Connect the coax cable assembly (comcode 847565132) to the outdoor CAU. Dress the cable down the side of the building to the grounding block. Attach the cable to the building as required. Be sure to avoid crushing or otherwise distorting the cable. Make the connector finger-tight only. Using tools damages the WFB.

6.Cut the coax cable at the grounding block, and ensure that you leave enough material to form a drip loop. This is the only cable cut permitted. Do not cut the coaxial cable once it is connected to an active WFB. This could short and subsequently damage WFB ports. (See the following “Note.”)

7.Connect the remaining cable to the WFB, and route the cut end through the previously prepared cable passage.

NOTE:

The DWBS is designed to use the supplied 100 foot coax cable to interconnect the WFB and the CAU. Using either shorter or longer cables degrades system performance and violates FCC regulations. Once the cable is cut in Step 6, do not shorten either portion of the cable by cutting the cable again. Also, do not mix and match cable pieces from other outdoor CAUs. If 100 feet of coax cable is insufficient to interconnect the outdoor CAU and WFB, the WFB should be moved closer. If this is not possible, the outdoor CAU must be relocated with guidance from the WiSE Engineering team.

8.Strip the ends of the coax cable, and install the coax connectors as shown and explained in the following figure. Use only the TNC connectors provided with the outdoor CAU. These connectors are specifically designed for use with the supplied cable. Appropriate coax stripping and connector crimp tools are identified in the following tables.

Issue 5 June 1999 3-39

Page 78 Page 80
Page 79
Image 79
Lucent Technologies 555-232-102 manual
Page 78 Page 80

555-232-102 specifications

Lucent Technologies, a key player in the telecommunications industry during the late 20th century, played a significant role in advancing the technology that shaped modern communication systems. Among its diverse product offerings, the 555-232-102 model stands out as an exemplary piece of equipment, notable for its robustness and versatility.

The 555-232-102 is primarily a telecommunications switch designed for both small and large-scale networks, making it suitable for a variety of applications. Its main features include a highly reliable architecture that supports both voice and data transmission seamlessly. This model incorporates advanced signaling technologies, which enable it to handle multiple connections simultaneously, enhancing its efficiency in busy environments.

One of the defining characteristics of the 555-232-102 is its modular design. This allows for easy upgrades and customization depending on the user’s specific needs. With various interfaces available, including analog and digital connections, the device caters to a wide range of telecommunications technologies, from traditional landline systems to modern VoIP setups.

The technology embedded in the 555-232-102 also emphasizes security and redundancy. Built-in failover protocols ensure that even in the event of a hardware failure, communication remains uninterrupted. This aspect is crucial for critical infrastructure where downtime can have serious consequences.

Moreover, the 555-232-102 supports multiple protocols, making it future-proof as telecommunications standards evolve. This adaptability allows organizations to invest in a solution that remains relevant for years to come without the need for complete overhauls.

Another key technological feature is its user-friendly management interface. This interface allows network administrators to monitor performance metrics, troubleshoot issues, and configure settings with ease. The intuitive design reduces the learning curve and enables rapid deployment in various environments.

Energy efficiency is another characteristic of the 555-232-102 that aligns with modern standards of sustainability. By optimizing power consumption without compromising performance, Lucent Technologies demonstrates a commitment to eco-friendly practices.

In conclusion, the Lucent Technologies 555-232-102 embodies the intersection of reliability, versatility, and advanced telecommunications technology. Its modular design, support for multiple protocols, robust security features, and user-friendly management tools make it a significant asset for any organization looking to enhance its communication infrastructure. As modern telecommunications continue to evolve, the legacy of the 555-232-102 serves as a benchmark for future innovations.
Top Page Image Contents