Safety Information
■Do not use the product near water or when you are wet. If the product comes in contact with any liquids, unplug the power cord and WT line cords immediately. Do not plug the product back in until it has dried thoroughly.
■If you suspect a gas leak, report it immediately, but use a WT away from the area in question. The WT’s electrical contacts could generate a tiny spark. While unlikely, it is possible that this spark could ignite a heavy concentration of gas. This product is not approved for use in areas identified by the Occupational Safety and Health Administration (OSHA) as explosive environments. Only Explosive Atmosphere WTs may be used in such hazardous environments.
■
■
■
■
Install this product securely on a stable surface. Damage may result if the product falls.
Use only the correct power source. If you are not sure of the power supply to your location, consult your local power company.
Use only the Model
The CAU must be installed with the coaxial cable provided (comcode 847565132). DO NOT cut or modify the cable. Loop any excess cable in the ceiling.
NOTE:
Do not kink or crush the coaxial cable.
■Install this product in a protected location where no one can step on or trip over power cords and WT line cords. Do not place objects on the cords that may cause damage or abrasion.
■
■
Whenever possible, install
Do not allow anything to rest on the power cord. Do not locate this product where the cord will be damaged by persons walking on it. Do not overload wall outlets; this can result in fire or electric shock. Do not staple or otherwise attach the power cord to building surfaces.
■Slots and openings in the WFB and CAU are provided for ventilation. To protect the housing from overheating, these openings must not be blocked or covered. Also, do not place this product in an enclosed area unless proper ventilation is provided.
■Never push objects of any kind into this product through housing slots since the objects may touch hazardous voltage points or short out parts that could result in a risk of electric shock. Never spill liquid of any kind on the WT.
■
■
Never place this product near or over a radiator or heat register.
Use only the type of battery pack shipped with this product.
Issue 5 June 1999
