DWBS Testing
c.Press the More soft key.
3.Upon completing your
Procedure: Verifying Operative
Cell IDs
This procedure verifies that all the cells in the wireless configuration are “up” and providing coverage.
NOTE:
Cell IDs for the 9630 Series WTs update dynamically. Therefore, the following procedure is not required for 9630 Series WTs.
1.Move the 9601 WT battery away from its set position slightly; then reinsert it.
2.For a 9601 WT, using the installation map as a guide, step into the first cell to be checked, and position yourself close to the CAU (or to the WFB, if no CAUs are present) for the particular cell. Obtain the cell ID by executing the following key sequence on the 9601 WT:
a.Press
b.Press
Menu
Next
.
.
c. Press the Info soft key.
d. Press Next to display the cell ID.
3.Confirm that the cell ID is displayed. If the cell ID is displayed, repeat Step 1 for all the cells in the configuration. If there is no cell ID displayed, use the following table:
If... | Then... |
|
|
Unit is a CAU | Go to Step 3 |
|
|
Unit is a WFB | Go to Step 4 |
|
|