Lucent Technologies 555-232-102 manual 2. WT Download Error Codes continued, Severity

DWBS Testing

Table 4-2. WT Download Error Codes (continued)

Error Code	Severity	Description/Recommendation
0x892	High	RC is busy receiving a WT package from the
		MSS.
		Wait for the download from the MSS to complete.
		This should take about five minutes.
0x893	High	The RC flash does not contain a WT file to use
		for an upgrade.
		Check the Feature-Related System Parameters
		form at the bottom of page 2 for the RC circuit
		pack. If the circuit pack is not listed, issue the
		change system feature command and add it to
		the list. Then issue the enable wt-upgrade
		[PPCSS] command.
0x894	High	The RC flash contains firmware for a different
		model WT.
		Download the correct firmware package. Then
		check the Feature-Related System Parameters
		form at the bottom of page 2 for the RC circuit
		pack. If the circuit pack is not listed, issue the
		change system feature command and add it to
		the list. Then issue the enable wt-upgrade
		[PPCSS] command.
0x895	High	The RC flash does not recognize the type of WT
		that is connected.
		The RC downloads only 9601 WTs and 9630
		Series WTs.
0x897	High	RC was requested to download a 9601 WT;
		however, the RC has only the 9630 Series WT
		firmware download package to send.
		Download the 9601 WT package to the RC.
0x898	High	RC was requested to download a 9630 Series
		WT; however, the RC has only the 9601 WT
		firmware download package to send.
		Download the 9630 Series WT package to the
		RC.

NOTE: The 9630 Series WT boot code firmware provides the automatic restart of the download process with low severity errors. The download process is attempted three times if the problem continues to occur. Thereafter, the error is declared as a high severity error, and user intervention is required.

4-14Issue 5 June 1999