side of Grill Head, install the Grease Draining Traywith its drain hole to left, which is the side opposite from the Tank
From the front side of cabinet, open the front doors and Install the Grease Receptacle under Grease Draining Tray. See Fig. 7.
Installing Manual Lighting Stick
Attach the Manual Lighting Stick to the Left Bowl Support Bracket as shown in Fig. 8.
Align the hole at the end of Manual Lighting Stick Wire with the threaded hole on the Left
Bowl Support Bracket. Tighten securely using the M4x8mm Pattern Head Screw packed with the Manual Liqhtinq Stick.
Figure 8
M4x8mm PATTERN
HEAD SCREW
MANUAL LIGHTING
STICK
Figure 7
GREASE HEAT
DRAIN- SHIELD
GRILLING
HEADTRAY
\
FRONT
DOOR
;EMBLED
VALVE KIT
GREASE
RECEPTACLE
Figure 9
SIDE SHELF FRAME
GRILL HEAD
SIDE BURNER
FRAME
Installing Side Shelf, Side Burner and Tool
Holder Kit
Remove Side Burner from Side Burner Kit before installing.
Enlisting the aid of an assistant, attach Side Burner Frame to right side of grill. Attach Side Shelf
Frame to left side of grill as shown in Fig. 9. Align the 4 holes on Side Shelf Frame and Side Burner Frame with the threaded holes on left and
right Bowl Support Brackets. Tighten securely using 4 of the 1/4"x3/4" Pattern Head Screws provided.
Install the
Burner Frame. See Fig. 9a. Attach the Pre- assembled Valve Kit to the Side Burner Valve Hole
on the Side Burner Frame, as shown in Fig. 9a. Align the 2 holes on the Side Burner Frame with the threaded holes on the Side Burner Valve
Bracket. Tighten securely using 2 of M4x8mm Pattern Head Screws and 2 Washers packed with the Control Knob.
Cut Fastening Band from Pot Support and set Pot support aside. Install the Side Burner through the top hole in Side Burner Frame and onto the Side Burner Valve. Make sure that opening at
BOWL SUPPORT
Figure 9a
HOLES FOR SIDE
BURNER VALVE KIT
|
|
| BURNER |
|
| FRAME | |
M4x8mm | _"_'_ |
| EMBLED |
PATTERN | HEAD | VALVE | KIT |
|
| ||
SCREW | AND |
|
|
WASHER |
|
|
|
|
| BURNER | |
|
| VALVE | BRACKET |
11
