Installation Instructions (cont'd)

Converting the Lower

Element (cont'd)

9.Replace terminal cover on thermostat making sure that the locking tabs on the terminal cover are in place.

_,WARNING

Make sure the thermostat is flush against the tank, the terminal cover is in place, and the insulation is replaced. Failure to do so can result in DEATH, SERIOUS BODILY

INJURY, OR PROPERTY DAMAGE.

12.Complete wiring to the water heater, or if completed, turn

"ON" electric power to the water heater after filling the tank with water.

10.Replace the insulation block and pad so that it completely covers the thermostat and element.

CAUTION

Never use this water heater unless it is completely full of water. To prevent damage to the tank and heating ele- ment, the tank must be filled with water. Water must flow from the hot water faucet before turning "ON" power.

11. Replace the access panel.

12

Page 12
Image 12
Kenmore 153.326761, 153.326561, 153.326361, 153.326461, 153.326661, 153.326861 owner manual Replace the access panel