Materials and Basic Tools Needed
Materials Needed
_lb simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materi- als, depending on your type of installation.
WATER HEATER INSTALLA. TION KIT WITH FLEXIBLE
CONNECTORS FOR 3/4" OR 1/2" THREADED OR COPPER
PLUMBING
EXPANSION | TANKS | FOR THERMAL | DRAIN | PANS AVAILABLE | IN 20" | ||
EXPANSION | CONDITIONS AVAILABLE | DIAMETER | FOR WATER | HEATERS | |||
IN 2 GALLON AND | 5 GALLON CAPACITY | HAVING | A DIAMETER | 18" OR LESS, | |||
THROUGH | LOCAL | SEARS STORE OR | 24" DIAMETER FOR | WATER | |||
SERVICE CENTER |
| HEATERS | HAVING A DIAMETER 22" | ||||
|
|
| OR LESS AND AVAILABLE IN 20" | ||||
|
|
| DIAMETER | FOR WATER | HEATERS | ||
|
|
| HAVING A DIAMETER 26" OR LESS | ||||
Basic Tools
You may or may not need all of these tools, depending on your
type of installation. | These | tools can be purchased | at your local |
Sears store,
Pipe Wrench (2) Screwdriver
6 Foot Tape or Folding Rule Garden Hose
Drill
Pipe Dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT_HEAD SCREW DRIVER
PIPE
WRENCH
PHILLIPS SCREWDRIVER
(SQUEEZEPIPE DOPETUBE)
ROLL OF TEFLON TAPE DRILL (Use only on water connections)
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
HACKSAW
3/4" WIRE BRUSH
I/2" WIRE BRUSH
PROPANE TORCH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY | SOLDER | TUBING |
CLOTH | FLUX | CUTTER |
