Kenmore 153.332418, 153.332462, 153.332362 Materials and Basic Tools Needed, Materials Needed

Materials and Basic Tools Needed

Materials Needed

To simplify the installation Sears has available the installation parts shown below. You may or may not need all of these materi-

als, depending on your type of installation.

		EXPANSION		TANKS		FLEXIBLE	WATER
						HEATER	GAS CON-
		FOR THERMAL				NECTOR	WITH
		EXPANSION		CONDI-		FITTINGS
		TIONS	AVAILABLE		IN
		2 GALLON		AND	5
		GALLON		CAPACITY
		THROUGH		LOCAL
		SEARS	STORE OR
		SERVICE	CENTERS
WATER	HEATER	INSTAL-
LATION KIT WITH FLEXI-
BLE CONNECTORS		FOR
314" OR	112" THREADED				WATER	HEATER	HEAT
OR COPPER PLUMBING
					TRAPS	HELP REDUCE HEAT
		VENT PIPE
					LOSS	DUE TO	THERMAL
					SYPHONING

WATER HEATER STAND 24"x24"x18"

FOR USE WITH WATER HEATERS

INSTALLED IN RESIDENTIAL

GARAGES HAVING A DIAMETER 24"

OR LESS AND A RATED CAPACITY 75

GALLONS OR LESS

DRAIN PANS

AVAILABLE IN 20" DIAMETER FOR WATER HEATERS HAVING A DIAME-

TER 18" OR LESS AND AVAILABLE IN

28" DIAMETER FOR WATER HEATERS HAVING A DIAMETER 26" OR LESS

Basic Tools

You may or may not need all of these tools, depending on your type of installation. These tools can be purchased at your local Sears store.

•Pipe Wrenches (2) 14"

•Screwdriver

•Tin Snips

•6 Foot Tape of Folding Rule

•Garden Hose

•Drill

•Pipe dope or Teflon Tape

GARDEN HOSE 6 FOOT TAPE

PIPE WRENCH

SLOT-HEAD SCREWDRIVER

PHILLIPS SCREWDRIVER

TIN SNIPS

ROLL OF TEFLON TAPE

(USE ONLY ON WATER

CONNECTIONS)DRILL

PIPE DOPE (SQUEEZE TUBE) (USE FOR WATER AND

GAS CONNECTIONS)

ADDITIONAL TOOLS NEEDED

WHEN SWEAT SOLDERING

•Tubing Cutters or Hacksaw

•Propane Torch

•Soft Solder

•Solder Flux

•Emery Cloth

•Wire Brushes

				\
	HACKSAW
	314" WIRE		BRUSH
		112" WIRE	BRUSH
	_;_			TORCH
				PROPANE
ROLL	OF	LEAD FREE
SOFT		SOLDER
ROLL OF	EMERY
CLOTH			SOLDER FLUX	TUBING
				CUTTER