INSTALLATION INSTRUCTIONS

Tools needed

Gather the required tools and parts before starting installation. Read and follow the safety instructions provided with any tools

listed

here,

 

 

 

 

 

Flat-blade

screwdriver

Wood block

 

#2 Phillips

screwdriver

Caulking

gun and

Level

 

 

compound

(for

installing

 

 

 

 

new exhaust vent)

Adjustable

wrench

Tin snips

(new

vent

1A" nut driver

 

installations)

 

Wire stripper (direct wire • Vent clamps installations)

Parts supplied

Remove parts package from the dryer drum. Check that all parts listed are included.

3- Control knobs

4 - Leveling legs

Parts needed

Check local codes, existing electrical supply and venting, and see "Venting Requirements" and "Electrical Requirements"

before purchasing parts.

Mobile home installations require metal exhaust system hardware available for purchase from your local Sears store or Sears Service Center. For further information, please call 1-8OO-4-MY-HOME® (1-800-469-4663}.

Expmosion Hazard

Keep flammable materials and vapors, such as gasomine, away from dryer,

Pmace dryer at Beast 18 inches (46 cm) above the floor for a garage installation,

Failure to do so can resumt in death, e×pmosion, or fire.

You will need

A location that allows for proper exhaust installation, See "Venting Requirements,"

A separate 30 amp circuit.

A grounded electrical outlet located within 2 ft (61 cm) of either side of the dryer, See "Electrical Requirements."

A sturdy floor to support the dryer weight (dryer and load) of 115 Ibs (52 kg). The combined weight of a companion appliance should also be considered.

A level floor with a maximum slope of 1" (2.5 cm) under entire dryer.

Do not operate your dryer at temperatures below 45°F (7°C). At lower temperatures, the dryer might not shut off at the end of an automatic cycle. Drying times can be extended,

The dryer must not be installed or stored in an area where it will be exposed to water and/or weather.

Check code requirements. Some codes limit, or do not permit, installation of the dryer in garages, closets, mobile homes, or sleeping quarters. Contact your local building inspector.

Page 5
Image 5
Kenmore 240-Volt Compact Electric Dryer, 110.84182 manual Tools needed, Parts supplied, Parts needed, You will need