BEFORE CALLING FOR SERVICE (CONTINUED)
PROBLEM
•Food does not roast or bake properly
. Loweroven will not
PO$SIIBL_ CAUSE
•Recipe not followed
•Range and oven rack not level
Using improper cookware
•Controls not set properly
•Clean cycle interrupted too soon
•Oven too dirty
DON'T CALL FOR SERVICE UNTIL YOU CHECK
• Is recipe tested and reliable?
,Check the Installation Instruc. tlons for leveling Instructions.
•See cooking section of this manual
iCheck
i Heavily soiled ovens require a 3 1/2 hour clean cycle.
i Heavy splllovers should be removed before setting clean cycle. Repeat clean cycle.
Lower oven door will not unlock
Electronic Touch Pads will not work
'• Electronic Display Panel goes blank or blinks
•Clean cycle not complete
•Clock not set
•Electrical service has caused Interference on main power line
Oven must cool below lock
temperature after clean cycle Is complete.
Touch CLOCK pad and enter time.
If it can't be reset by touching
pads, disconnect your cooking center at main fuse or circuit
breaker. Watt one minute and
reconnect power. Reset
CLOCK.
. Control Panel on, yet oven • START pad not touched will not operate
• Door not Closed correctly
Another function was touched
Numbers not entered after
touching Time Cook
Finished temperature not entered after entering Auto Roast Code 7
CLEAR/OFF pad touched
accidentally
No code number entered after
touchlng Auto Roast
Touch START pad.
Make sure door is securely closed_
Touch CLEAR/OFF to cancel.
Complete setting.
Complete setting.
•Repeat setting.
•Complete setting.
3! |
