Kenmore 49425 The Hold Timer, To Set Minute Timer, USING A HOLDING TiME, Questions And Answers

Models: 49425 49429

1 36
Download 36 pages 54.76 Kb
Page 9
Image 9
THE HOLD TIMER

THE HOLD TIMER

The HOLD TIMER has three timing functions:

It can be set as a minute timer°

It can be set as a holding time after defrosting. It can be set to delay cooking_

The HOLD TIMER operates without microwave energy.

TO SET MINUTE TIMER

The minute timer displays minutes:seconds. The maximum time setting is 99 minutes and 99 seconds.

t.Press HOLD TIMER,

TIMER

HOLD ]

2.Press number pads to set amount of time, For example, to set three minutes press 3, 0, and 0.

3_ Press START.

%

When time Is up, oven signals and display flashes "END".

To cancel press CLEAR/OFF.

USING A HOLDING TiME

The HOLD TIMER can be used to program a "holdlng time" between microwave cooking functions, The time can range from one second to 99 minutes and 99 seconds. A holding time may be found In some of your recipes°

PROGRAMMING DELAYED COOKING

1.To delay cooking up to 99 minutes and 99 seconds, touch either TIME COOK, TEMP COOK/HOLD or

AUTO ROAST,

2, Enter cook time, temperature or code by pressing number pad(s),

3.Press HOLD TIMER.

4.Enter number of minutes to delay cooking. WHEN DELAYING TEMP COOK!HOLD or AUTO ROAST, BE SURE PROBE IS IN FOOD.

5.Press START. Timer will count down to zero_ Cooking will begin when timer countdown Is complete. Display will show power level when cooklng begins.

To cancel, press CLEAR/OFF.

Note: Fan and light will operate but no microwave energy is used during delay.

If door is opened the countdown wtlt stop. To resume delay program, close door and press START.

HOW TO TIME DEFROST, HOLD AND TiME

COOK

1_ Press TiME DEFROST.

2, Press number pads to set defrosting time. (Defrosting Is automatically set on power level 3 but can be changed by touching the POWER CONTROL pad and the desired power level.)

=Press HOLD TI_ER.

4.Press number pads to set holding time,

5.Press TIME COOK.

6.Press number pads to set cooking time.

7o Press START;

(As each function Is automatically performed, the oven display showsthelnstructlonsentered and the function.)

When time is up, the oven signals and the display

flashes =ENID_, The oven shuts off. To cancel, press

CLEAR/OFF.

QUESTIONS AND ANSWERS

Q. What wlll happen If I accidentally reverse my defrost, hold and cook Instructions?

A. The oven will automatically rearrange your program. Defrosting will always come first, then hold, and then the cooking function.

Q, Can t defrost and hold only?

A. Yes. All you need to do Is program In Time Defrost and the amount of time, then program Hold and the amount of time, Be sure to put the thawed dish in the refrigerator promptly.

Q_ I programmed my oven for a specific defrosting time

but it defrosted longer than necessary. What happened?

A. When Instructions conflict, the oven carries out the last instruction. You may have set oven to Defrost for

4 minutes, hold for 2 minutes, and then defrost for 6 minutes° The oven would defrost for 6 minutes and

hold for 2 minutes.

Never let food such as dairy pro. ducts, fish, meat, poultry, etc., sit for more than I hour before cooking starts, when you set your

oven for a delay start. Room temperature promotes the growth of harmful bacteria.

NEMIC08

Page 9
Image 9
Kenmore 49425, 49429 manual The Hold Timer, To Set Minute Timer, USING A HOLDING TiME, Programming Delayed Cooking