Kenmore 625.38376 I F--.I, nwush or, Questions? Call The Kenmore Water Line, Bypass Valves

I F--.I	BYPASS VALVES
	Bypass valve(s) should always remain in soft water
	service position. Position in "bypass" only if needed for
	softener repairs.
	SINGLE	BYPASS
	__	pull stem
		outward for
	I	service

A

,nwush or

			Inches	CM
A	Salt Tank	Height	40-1/4	102.2
B	Resin Tank Diameter		9	22.9
	(nominal)
C	Resin Tank Height (nominal)		40	101.6
D	Inlet-Outlet	Height	41-1/2	105.4
E	Overall Height		47-3/4	121.3
I=1	Length		19-3/4	50.2
1=2 Width			16-1/2	41.9
-	Distance between inlet-outlet		3-3/4	8.6
	centerlines

3 VALVE	BYPASS		Bypass
FOR SERVICE			valve
close bypass valve
open inlet & outlet valves
FOR BYPASS		Outlet
open	bypass	valve	Inlet
close inlet & outlet			valve

FIG. 57

MODEL 383760 TIMER CODE H 32

MODEL 393760 TIMER CODE H 33

WATER SUPPLY TO WATER SOFTENER				MODEL 38376	MODEL 39376
Minimum	water system flow (gpm)			3	3
Minimum-maximum			water pressure (psi)	20 - 125	20 - 125
Minimum-maximum			water temperature (°F)	40 - 120	40 - 120
Maximum	water	hardness (gpg)		110	110
Maximum	"clear	water" iron (ppm)*		10	10
SALT FOR WATER SOFTENER
Type of salt needed				nugget	nugget
Alternate	type of salt			pure, evaporated, compacted	pure, evaporated, compacted
				water softener salt	water softener salt

gpm = gallons per minute psi = pounds per square inch

gpg = grains per gallon ppm = parts per million

*Capacity to remove clear water iron is substantiated by WQA test data. State of Wisconsin requires additional treatment if water supply contains greater than 5 ppm clear water iron.

Questions? Call The Kenmore Water Line 1-800-426-9345

33