Kenmore 625.38376 Valve Bypass, Questions? Call The Kenmore Water Line, Installing, Holding

INSTALLING	HOLDING	CLIPS
Black Clip	Cross	Section of Valve

Bypass Valve or	Inlet or Outlet
Installation Adaptor

Before installing the bypass valve, or copper tube, be sure the turbine and support are firmly in place in the valve outlet port.

Turbine
Support	Sensor Port

O-Ring

Clip Snaps into Place

Between Larger Diameter Rings FIG. 11

Turbine

FIG. 10

INSTALLING 3 VALVE BYPASS AND PIPES Complete the following steps to install the three (3) valve bypass:

•Cut the house main water pipe where you will con- nect the softener.

•Loosely put together pipe, fittings, and the three

(3) valves.

•Place valve(s) within easy reach.

When all pipe, fittings and valves make a good fit together, tighten all threaded joints (use pipe dope on outside threads), or solder all sweat joints.

BYPASS VALVE TURNED DOWNWARD

Turn bypass valve upside down to connect to floor

level plumbing.

FIG. 12

3 VALVE BYPASS

TO FIG. 13

Softener Inlet

Questions? Call The Kenmore Water Line 1-800-426-9345

12