Keeping the Water Softener Clean | Kenmore 625.38818, 625.38817

[i!i !! :i :_!! :i :_!! :; SECTION 3

CARE OF YOUR WATER SOFTENER

B. KEEPING THE WATER SOFTENER CLEAN

NOZZLE & VENTURI

A clean nozzle and venturi (FIG. 11) is a must for the softener to work right. This small unit moves brine from the salt storage tank to the resin tank during re-

generation. If it becomes plugged with sand, silt,

dirt, etc., the softener will not work and you will get hard water.

To get to the nozzle and venturi, remove the softener top cover. Be sure the softener is in service cycle (no

water pressure at nozzle and venturi).

1)Turn off the cap from the nozzle and venturi hous- ing.

2)Lift out the screen support and screen, do not lose the Im_q;eo-ring seal.

3)Then the nozzle and venturi. Wash and rinse the

parts in warm water until clean. If needed, use a small brush to remove iron or dirt. Also check and

clean the gasket, flow plugs and screens.

Carefully replace all parts in the correct order. Lu- bricate the o-ring seal with silicone grease or Vase-

line and place in position. Install and tighten the

cap, by hand only. Do not overtighten, which

may break the cap or housing.

Cleaning Nozzle & Venturi

Cap _

O-ring Seal --.__.___
Screen Support	_._.__._.._
Screen	_		*Flow Plug
			(1 -EP)
Nozzle&_itkUell	_	_	Screen

tered directly over the small holes in the nozzle & venturi

housing.

*Flow Plug

(HVDC)

Nozzle & Venturi

Housing

*Install with numbered side up, concave

side down. Be sure the largest flow plug is located in the nozzle & venturi housing.

IRON FROM RESIN BED

Your water softener takes hardness minerals (cal-

cium and magnesium) out of the water. Also, it can

control some "clear water" iron. See maximum al-

lowed in the specifications on page 4-1. With clear water iron, water from a faucet is clear when first put into a glass. After 15 to 30 minutes, the water be- gins to cloud or turn rust colored. A water softener WILL NOT remove any iron which makes the water cloudy or rusty as it comes from the faucet (called red water iron). To take red water iron out of water,

or over the maximum of clear water iron, an iron fil-

ter or other equipment is needed. Your local Sears store has trained people to help you with iron water problems.

If your water supply has clear water iron, even

though less than the maximum allowed, regular resin bed cleaning is needed. Your local Sears store has resin bed cleaner, Item No. 42-34426 for this. Clean the bed at least every 6 months. If iron shows

up in the soft water before 6 months, clean more

often. Printed instructions are on the resin bed cleaner bottle.

3-2

Problems, Questions? Call 1- 800- 426- 9345 Kenmore Water Line

625.38817, 625.38818 specifications

The Kenmore 625.38817 and 625.38818 are two top-tier water softeners that stand out in their category for their innovative features and reliable performance. Both models effectively address hard water issues, which can cause scale build-up in pipes and on fixtures, leading to diminished appliance efficiency and lifespan.

One of the main features of the Kenmore 625.38817 and 625.38818 is their efficient ion-exchange technology. This process utilizes sodium ions to replace the hard minerals, such as calcium and magnesium, present in the water supply. As a result, users experience softer water that is gentler on their skin and hair, as well as improved soap and detergent performance when washing clothes or dishes.

Another notable characteristic of these models is their capacity. The 625.38817 features a 30,000-grain capacity, while the 625.38818 offers an even larger 40,000-grain capacity. This allows households with different water usage levels to find an appropriate fit. The larger capacity model is particularly well-suited for bigger families or those who frequently use large amounts of water.

Both models also come with a demand-initiated regeneration system. This technology ensures that the water softener only regenerates when necessary, based on the actual water usage. This feature not only conserves water and salt but also enhances the overall efficiency of the system, reducing operating costs.

Additionally, the digital control panel on both models makes it easy to monitor settings and adjust them as needed. Users can accurately track their remaining salt levels and receive alerts when it’s time to replenish. The simple interface ensures ease of use for all members of the household, regardless of their technical expertise.

The Kenmore 625.38817 and 625.38818 are also designed with robust construction, ensuring long-lasting durability. Their compact design allows for installation in various spaces, making them versatile enough to fit into most homes.

In conclusion, the Kenmore 625.38817 and 625.38818 water softeners offer compelling features, advanced technologies, and remarkable efficiency. With their effective ion-exchange systems, demand-initiated regeneration, and user-friendly controls, these models provide practical solutions for homeowners looking to tackle hard water issues without compromising on quality or convenience.

Kenmore 625.38818, 625.38817 Keeping the Water Softener Clean, Cleaning Nozzle & Venturi

Models: 625.38817 625.38818