ToremovetheLarge Object Trap/Cylinder Filter
Assembly:
1.Remove the bottom rack.
2.Grasp the assembly and turn it counterclockwise
-1/4turn as shown below.
. Lift out the assembly as shown below.
4.Carefully examine the assembly. If you find debris in the Large Obiect Trap, turn it
5.Flush the Cylinder Filter clean by holding it under running water.
To reinstall the filter system:
1.Return the fine filter to its eriginally installed position.
2.Place the Large Obiect Trap/Cylinder Filter Assembly into its installed position in the dishwasher floor.
3.Turn the ring handle clockwise 1/4 turn until it is locked.
4.Gently pull the ring handle to ensure that the assembly is locked into place.
•Clean the Exterior Door Panel
Colored Doors
Use only a soft cloth that is lightly dampened with soapy water.
Stainless Steel Doors
Use a soft cleth with a
•Clean the Interior
Hard water minerals can cause a white film to build up en the inside surfaces, especially iust beneath the door area. De not clean the dishwasher interior until it has cooled.
Wear rubber gloves. Do not use any type of cleanser other than dishwasher detergent because it may cause foaming or sudsing.
*Make a paste with powdered dishwasher detergent on
a damp sponge and clean.
OR
*Use liquid automatic dishwasher detergent and clean with a damp sponge
*Clean the Door Gasket
Regularly clean the door gasket with a damp cloth to remove food particles and other debris. Also clean the door seal, located inside the dishwasher at the bottom of the door.
•Winterizing Your Dishwasher
If your dishwasher will be unused for an extended period of time in a location that experiences freezing temperatures (e.g., in a holiday home or through a vacation period), have your dishwasher winterized by an authorized service center.
Fine Filter
18
