Kenmore 630.1391, 630.1390 manual Loading the Top Rack

Do not pre-wash items that have loosely attached soiling. Remove large food particles, bones, seeds, toothpicks, and excessive grease, items having burned-on, baked-on or starchy soils may require pre-treatment.

Refer to the Dishware Materials section for more information about dishware suitability.

•Load only dishwasher-safe items into the dishwasher. Load dishes in the dishwasher racks so that the insides of bowls, pots and pans are facing the spray arms. Avoid nesting and contact points between dishes. Separate items of dissimilar metals.

Load dishes and glasses at an angle to avoid puddling and improve drying performance.

To avoid dishwasher damage, do not load the dishwasher with paper products, plastic bags, packing materials, or anything other than normal, dishwasher- safe dishware and kitchenware.

TOP RACK -SUGGESTED LOADING PATTERN

NOTE: Load cups and glasses between tines. Loading over the tines can cause breakage or water spots.

TOP RACK - ADDITIONAL LOADING PATTERN

Loading the Top Rack

NOTE: Ensure items do not protrude through the bottom of the racks and block the spray arms.

NOTE: When pushing the top rack into the dishwasher, push it until it stops against the back of the tub so the top rack spray arm will connect to the water supply at the back of the tub. Do not push the top rack with the door.

Loading the Bottom Rack

Place large items in the bottom rack. Load pots, pans and bowls with the dirty surfaces facing the spray arms.

Unloadlng Sequence

•Unload the bottom rack first.

"Unload the silverware basket. Unload the top rack.

NOTI_: Do not use rubber bands (to hold items in place in the racks) or any other after market parts in your dishwasher. The use of such items could potentially damage the drain pump.

BOTTOM RACK -SUGGESTED LOADING PATTERN

BOTTOM RACK- ADDITIONAL LOADING PATTERN