Kenmore 630.1390, 630.1391 manual Changing A Cycle, Canceling A Cycle, Control Lock, drying

Smart Pots & Normal China Fast

Turbo

I,

o	o	o	o	o
Wash"	Pans	Wash	Gentle	Wash

If your unit has a display window similar to the one shown above, follow the instructions below.

CANCELING A CYCLE

. Hold down the CANCEL button until the display shows "0:01". Wait for the end of cycle indicator.

. Press "POWER" button to turn the unit off. Then press the "POWER" button again to turn the unit back on.

. One of the cycle LEDs will flash. This indicates that the unit has been reset.

CHANGING A CYCLE

If you need to change the running cycle to a new cycle:

. Hold down the CANCEL button until the display shows "0:01"

. Press POWER button to turn the unit off. Then press the "POWER" button again to turn the unit back on

. You can now select a new cycle.

Control Lock

. After pressing the "START" button you can activate the Control Lock feature.

Press and hold down the "CHINA GENTLE" button until "CL" appears in the display window. Now any button you press (except POWER) will not function and "CL" will display each time.

*To deactivate, press and hold the "CHINA GENTLE" button until the "C:L" disappears from the display window.

To enter the options mode: (rinse aid setting, dry assist)

. Door must be closed. Press the "POWER" button to turn the unit on.

. The countdown display and one of the Wash Cycle LEDs will be flashing.

. Press and hold the "NORMAL WASH" button, then press and release the "START" button. Now release the "NORMAL WASH" button.

. The display will show either "d:O0 - d:01" or

"r:O0 - r :06". You are now in the options setup mode.

. Press "NORMAL WASH" to select the option you would like to adjust.

if the display shows "d:O0" or "d:01" you can turn the Dry Assist ON or OFF.

if the display shows between "r:O0" to "r:06" you can adjust the amount of rinse agent dispensed.

oSTART Clean

To set the amount of Rinse Aid:

NOTE: If your glasses have spots on them, you need more rinse agent. If your glasses have streaks, you need less Rinse Agent.

Follow the instructions to enter "options" mode. With the display showing between "r:O0" - "r:06":

. Press the "-" or "+" button to change the amount of rinse agent dispensed.

r:O0 --_ Rinse Agent OFF

r:03 --_ Medium amount of rinse agent dispensed r:06 --_ Highest amount of rinse agent

. Press "START" to save.

Dry Assist

With this option you can raise the temperature of the rinse water and increase the drying time for improved

drying.

Follow the instructions to enter "options" mode. With the display showing "d:O0" or "d:01":

Press the "-" or "+" button to activate or deactivate dry assist.

d:O0 --_ Dry Assist OFF d:01 --_ Dry Assist ON

. Press "START" to save.

Delay Start

This option allows you to delay the start time of your cycle. To select this feature:

*First select the desired cycJe.

*Then press the "-"or "+" button until you see the

desired delay time.

*The cycle will start once the displayed time elapses.

You could be seriously scalded if you allow hot water to splash out of the dishwasher. OPEN THE DOOR CAREFULLY during any wash or rinse cycle. Do not fully open the door until water noises have stopped.

15