Kenmore 630.1391, 630.1390 manual RinseAgent, Filllng the dispenser

Models: 630.1390 630.1391

1 22
Download 22 pages 27.33 Kb
Page 12
Image 12
RinseAgent

RinseAgent

To achieve proper drying, always use a liquid rinse agent, even if your detergent contains a rinse agent or drying additive.

NOTE: The Rinse Agent LED that illuminates when the Rinse Agent is low.

The LED will nat illuminate if there is enough rinse agent in the dishwasher.

Filllng the dispenser

m

*Make sure the dishwasher door is completely open.

,Add liquid rinse agent to the dispenser as shown below until the rinse agent reservoir is full.

Wipe up any excess rinse agent that puddles when the dispenser reservoir is full to prevent oversudsing.

After filling the rinse agent dispenser, the indicator light will go out in a few minutes after the dishwasher door is shut (select models only).

open

__

Lift tab to

Always use Rinse Agent even if your detergent contains rinse agent.

Add rinse agent when the Rinse Agent Indicator Light on the control panel illuminates.

12

Page 12
Image 12
Kenmore 630.1391, 630.1390 manual RinseAgent, Filllng the dispenser