Kenmore 630.13952, 630.13959 V. Repair, To remove outer door, Tools needed: T20 Torx screwdriver

Repair

V. Repair

VA. Disassembly procedures

Use the following disassembly procedures to access parts such as fascia panels, circulation pumps, heaters and controls.

To remove outer door

Tools needed: T20 Torx screwdriver.

1.Remove six T-20 Torx inner door screws below fascia panel -- three per side (1).

2.Carefully pull bottom of outer door out from dishwasher until top door tabs clear, then pull door down until it releases from dishwasher (2). Take care to not scratch outer door.

TIP: 1-piece foam door guards don’t need to be removed from doors.

NOTE: Outer doors don’t need to be removed when dishwashers are flipped upside-down or when fascia panels are removed, but can be if it makes repairs easier.

To remove toe kick

Tools needed: Phillips screwdriver.

1. Remove two Phillips screws and tilt toe kick out from dishwasher.

702_58300000149896_ara_en_b