CAUTION: While it is possible for one person to assemble this grill, obtain assistance from another person when handling some of the larger, heavier pieces 1. Open lid of shipping carton and remove top
sheet of cardboard. Lay cardboard sheet on floor and use as a work surface to protect floor and grill parts from scratches.
2.Remove packing materials from shipping carton.
3.You may slice the carton front corners with a utility knife to lay open the carton front panel. This will allow you to raise the grill head lid and remove the components packed inside the head.
4.Use the parts list to check that all parts have been included.
5.Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If there are damaged or missing parts when you unpack the shipping box, or you have questions during the assembly process, call:
Caution: Before moving onto side shelf assembly, remove main grease tray and cup from back of grill, and remove and discard any ties or packing material. Then reinsert tray/cup assembly back into grill as below picture shown.
For Assembly Questions, call
Assembling Side Burner Shelf & Side Shelf
1.Remove (2) ¼ x 3/8" Phillips head screws & (2) 1/4" lock washers from side burner shelf back bracket. Attach the bracket to side burner shelf using above screws & lock washers. (Fig. 1)
2.Remove (3) 5/32 x 1/2" Phillips head screws & (3) 5/32" lock washers from side burner shelf. (Fig. 2). Loosen (2) 5/32 x 1/2" Phillips head screws & (2) 5/32" lock washers on right side panel( Fig. 3, A), and remove (1) ½ x 3/8" Phillips head screws & (1) 1/2" lock washer. (Fig. 3, B)
3.Through side burner shelf screw holes, hang side burner on side panel by placing side burner slotted screw holes over side panel loosened screws and washers. (Fig. 4. Fix the side burner shelf to side panel using step 2 removed screws and lock washers as shown.
(Fig. 5, C, D, E).
Figure 1
Figure 2
Figure 3
Figure 3,
Figure 4
Figure 5
C
Figure 3,
A
f j |
D
\\\s
/'
/
7