Kenmore 790.3103, 790.3104 manual Oven Controls, Setting Kitchen Timer

Setting	Oven		Controls	(con't)
Setting Continuous			Bake or	12	Hour Energy	Saving
The TIMER	_	and FLEX CLEAN		@	pads control	the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous

Baking, iNSTRUCTiONS PRESS DISPLAY

To set the control for Continuous Bake or 12 Hour Energy

Saving features

1. Press and hold _ for 7 seconds (Figure1). After 7 seconds "12h" or %

-h" will appear in the display and the control will beep once.

2.Press @ to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12h" (Figure 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "- -h" indicates the control is set for the Continuous Bake feature (Figure 3).

3. Press to accept the change (Figure 4; display will return to

for 7	Figure 1
seconds

@

Figure 2

time of day) or press _ to reject the change. or@ Figure 3

Setting Kitchen Timer						Figure 4
The TIMER _	pad controls		the Kitchen Timer feature. The Kitchen Timer serves as an extra			timer in the kitchen that
will beep when the set time		has run out. It does		not start or stop cooking.	The Kitchen Timer feature can be used during
any of the other oven control		functions. Refer to		"Minimum and Maximum	Control Pad Settings"	for time amount settings.

INSTRUCTIONSPRESS

To set the Kitchen Timer (example for 5 minutes)

1. Press @. .....----will appear and "TIMER" will flash in the display

(Figure 5).

2.Press the number pads to set the desired time in the display (example

(_).	Press	The time	will begin to count down	with "5:00" and (_	START
"TIMER" Will stay		in the display	(Figure 6). Note: If	is not
pressed the timer will return to the time of day after 25 seconds.

3.When the set time has run out, "End" and "TIMER" will show in the display (Figure 7). The clock will sound with 3 beeps every 5 seconds until _,_,,_ is pressed.

To cancel	the Kitchen	Timer before the set	time has run out
Press _.	The display	will return to the time	of day.

DISPLAY

Figure 5

Figure 6

Figure 7

To Set Add 1 Minute Feature

The _	ADD 1 MINUTE	pad is used to set the	Add 1 Minute feature.	When the _	pad is pressed, 1 minute is
added	to the Kitchen Timer	feature if this feature	is already active. If the	Kitchen Timer	feature is not active and the

pad is pressed, the Kitchen Timer feature will become active and will begin counting down from 1 minute.

18