Kenmore 790.3104, 790.3103 Consumer Defined Control, Instructions, Pressdisplay, Oven Operation

Consumer Defined Control

Note: The Consumer Defined Control features are adjustments to the control that will not affect cooking results. These include the Oven Lockout, Temperature Display and Silent Control Operation features

Setting Oven Lockout Feature

The (_TO_pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and

prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.

INSTRUCTIONS

To activate the Oven Lockout feature

1.Press and hold _ for 3 seconds.

2.After 3 seconds "Loc" and I_1will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the "DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1).

PRESSDISPLAY

for 3

seconds

Figure 1

To	reactivate	normal		oven	operation:
					for	3
1.	Press and hold @			for 3 seconds. A beep will sound. The
					seconds
	"DOOR LOCKED" will			flash	in the display until the oven door
	has completely		unlocked (Figure 2).			Figure 2
2.	The wall oven		is again	fully operational.		,,,,,,,ii
						U(

Setting Silent Control Operation

The DELAYTIME _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control

operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps.

INSTRUCTIONS

To change control from normal sound operation to

silent control operation

1.To tell if your range is set for normal or silent operation press

and hold _. '....-- -- will appear and "DELAY" will flash in the

display (Figure 3). After 7 seconds "SP" (Speaker) will appear in the display. (Figure 4)

PRESSDISPLAY

@

Figure 3

for 7 seconds

2. Press _ to switch between normal sound operation and @

silent operation mode. The display will show either "SP" (Figure 4) or ":=="(Figure 5).

If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":==" appears (Figure 5), the control is in the silent operation mode.

. Press	to accept the change or press	to reject the
		@

change.

Note: The control will always beep at the end of a kitchen timer and will beep when a set temperature even if the control is set to silent operation.

Figure 4

Figure 5

has been reached,

19