Kenmore 790.7892, 790.7890 manual Setting Continuous Bake or 12 Hour Energy Saving, Saving features

Setting the Clock

Setting Continuous Bake or 12 Hour Energy Saving

TimerFlex

The Set/Offand Cleanpads control the Continuous Bake or 12 Hour Energy Saving features. The oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS PRESS DISPLAY

To set the control far Continuous Bake or 12 Hour Energy

Saving features

Timer

1.Press and hold Set/Offfor 7 seconds (Fig. 1). After 7 seconds "12Hr OFF" or "STAY On" will appear in the display and the control will

beep once (Fig 2 or 3).

Flex

2.Press Cleo0to switch between the 12 Hour Energy Saving and continuous bake features. Note: "12Hr OFF" (Fig. 2) in the display indicates the control is set for the 12 Hour Energy Saving mode and "STAY On" indicates the control is set for the Continuous Bake feature (Fig. 3).

. Press @ to accept the change (Fig. 4; display will return to time

of day) or press @ to reject the change.

Setting Kitchen Timer

Timer

Timer

Set/Offfor 7 seconds

Fig. 1

Flex

Clean

	Fig.	2
or	Fig. 3

@

Fig. 4

The Set/Offpad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen that will beep when the set time has run out. It does not start or stop cooking. The Kitchen Timer feature can be used during any of the other oven control functions_ except during a self-clean operation. Refer to "Minimum and Maximum Control Pad Settings"

for	time amount		settings.
				INSTRUCTIONS					PRESS	DISPLAY
To	set the Kitchen			Timer	(example:		5 mlnufes)
1.	Timer			5).
	Press Set/Off(Fig.								Timer
									Set/Off
2.	Press the	number		pads	to set	the	desired time	in the	display	Fig. 5
	(example	5).	Press _.		The	time	will begin to	count	down in the

display (Fig. 6). Note: If _ is not pressed the timer will return to the time of day after 30 seconds.

3.When the set time has run out° "End" and "TIMER" wiii show in

the display (Fig. 7). The clock wiii sound with 3 beeps every 7

Timer

seconds until Set/Offis pressed.

To cancel the Kitchen Timer before the set tlme has run out

Timer

Press Set/Off. The display will return to the time of day.

5@

Fig. 6

Timer

Set/Off

Fig. 7

To Set Acid I Minute Feature

Add I Add 1

The Minutepad is used to set the Add 1 Minute feature. When the Minutepad is pressed_ 1 minute is added to the Minute Timer

Add 1

feature if this feature is already active. If the Minute Timer feature is not active and the Minutepad is pressed_ the Minute Timer feature will become active and will begin counting down from 1 minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.

14