Kenmore 790.7890, 790.7892 manual Self-Cleaning, 200or, To Start the Self=Clean Cycle

Self-Cleaning

To Start the Self=Clean Cycle

Flex

The FLEX CLEAN Cleonpad controis the Seif-Cieaning feature. If you are

planning to use the oven directly after a self-clean cycle remember to

allow time for the oven to cool down and the oven door to unlock. This

normally takes about one hour. So a 3 hour self-clean cycle will actually take about 4 hours to complete.

*It is recommend to use a 2 hour self-clean cycle for light soils, a 3 hour cycle for average soils, and a 4 hour cycle for heavy soils (to assure satisfactory results)

INSTRUCTIONS

To start an immediate Self=Cleanlng cycle or to set a Delay

Start time of 4:30 and shut-offautomatically (example provided is a default 3 hour Self=Clean Cycle)

1.Be sure the clock is set with the correct time of day and the oven

door is closed.

Lower

2.Press Oven.

Flex

3.Press cI.... "CLEAN" will flash and "3:00 HR" will show in the

display (Fig. 1). The control will automatically clean for a 3 hour period (default self-cleaningcycle time). Note: If a 2 or 4 hour clean time is desired, press 2 0 0 for 2 hour or press

4 0 0 for a 4 hour clean time. Set the cleaning time based on the amount of soil: ligh h medium or heavy (* See above).

4.Press _. The "DOOR LOCKED" icon will flash; "CLEAN" icon and the letters "CLn" will remain on in the display (Fig. 2).

5.As soon as the control is set, the motor driven oven door lock will begin to close automatically. Once the door has been locked the "DOOR LOCKED" indicator light will stop flashing and remain on.

Also, the oven icon will appear in the display (Fig. 3). Note: Allow about 15 seconds for the oven door to lock.

Note: If the optional delay Self-Clean feature is desired, finish step 6-9.If Self-Clean is started immediately sklp the remaining steps and continue with "When the Self-Clean cycle is done" on the following page.

Delay

6.Press Sto_t(Fig. 4). Enter the desired start time using the number pads 4 3 0 (Fig. 5).

Z Press _. "CLEAN", "DELAY", "LOCI(" and "DOOR" will be displayed (Fig. 6).

9.The control wiii start the self-cleaning at the set start time, for the period of time previously selected. At that time, the icon "DELAY" wiii go out.

When the Self=Clean Cycle is Completed

1."HOT" will appear in the display. The time of day, the "DOOR LOCKED" and "CLEAN" icon wiii remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

_J__ To avoid possible burns use

care when opening the oven door after the Self- Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

_DO NOT force the oven door

open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

PRESSDISPLAY

Fig. 1

Lower

Oven

Flex

Clean

Fig. 2

200or

4OO Fig. 3

@

Fig. 4

Fig. 5

Fig. 6

Delay

Start

430

@

31